Differences

This shows you the differences between two versions of the page.

--- research:automated_irrigation_system [2019/07/15 12:27] – created aimeejulia
+++ research:automated_irrigation_system [2019/07/23 20:29] (current) – aimeejulia
@@ Line 1: / Line 1: @@
-====== Automated irrigation system ======
+====== Automated garden irrigation system ======
 ===== Equipment needed =====
-  * [[Soil moisture sensors]] - the number of sensors needed depends on the areas to be covered - for example in a small to medium size greenhouse one sensor should be sufficient, in larger areas such as in the garden which are dried in some areas and wetter in others you will need to use more sensors.
+  * Arduino Nano (or any kind of Arduino)
+  * light sensitive resistor 2kΩ - 6kΩ
+  * resistor 2kΩ
+  * relay/s
+  * valve/s 12V
+  * power supply 12V
-===== Step 1: Connect the Soil Humidity Sensor to the Arduino =====
+===== Code, License and list of Contributors =====
+The code, license and list of contributors are saved on the [[https://gitlab.com/ecohackerfarm/youngcodersummercamp/automated-garden-irrigation-system|gitlab project]].
+{{:research:breadboard.jpg?200|}}
+{{:research:arduino.jpg?200|}}
+{{:research:twelwevoltpowersupply.jpg?200|}}
+{{:research:valve.jpg?200|}}
+{{:research:schematic.png?600|}}